JIH-NC24L NC Sawing Machine High Production Cutting
- Automation feed, positioning. oil splashing and sawing.
- Feed stroke 1,250mm/2,500mm/6,000mm. (Repeat cycle feed stroke no limit for length)
- Horizontal cutting and saw move on linear guide way, that assure accurate and large cutting.
- Employ touch sensing screen for maximun operation convenience. The controller. Features self-diagnostic function which is displayed on the screen for convenient troubleshooting.
- Feed driven by hydraulic system, providing maximum stability of cutting.
- Two sets each of vertical clamps and horizontal clamps provided on the feeding system permits cutting of irregular work piece.
- 100 sets of size memory capacity. Each set allows for setting 12 sizes.
- The computer automatically records required time and quantity for each machining, providing convenient calculation of machining cost.
- During operation, the machine provides detection for lack of material. Available to set remain material.
- Feed models : 1. Stepping feed. 2. Repeat cycle feed. 3. Manual feed
Specially designed cutting way:After the saw blade moves forward for cutting, table moves to right and left for retracting 2 mm.Then the saw blade return to its home position. This special design may avoid return-cutting, while ensuring fine surface of cut and cutting accuracy.
Standard Accessories
20'' saw blade x 1pcs ( or specified size is available ) 、tool box、Horizontal clamps of worktable
JIH-455L ----20'' saw blade x 1pcs ( or specified size is available ), tool box, Infeed, Outfeed Roller Table 3.5m
JIH-NC30L ---30'' sawblade x 1pcs ( or specified size is available), tool box, Infeed, Outfeed Roller Table 3.5m
Model | JIH-NC24L TYPE(Original Model For JIH-455L) | JIH-NC30L TYPE | JIH-NC36L TYPE |
Servo Drive System | Ball screw (or high precision gear rack) | Ball screw (or high precision gear rack) | Ball screw |
Cutting Capacity ( H x W ) | 200 x200, 175 x210, 130 x350, 40x400mm(Depends on saw blade size, Check cutting capacity chart) | 250 x250, 210 x400, 180 x500mm(Depends on saw blade size, Check cutting capacity chart) | Circle ：Ø320, |
Max. Feed Distance(one cycle) | 1,000mm ( 2,500 / 6,000mm opt. ) Unlimited recycle feed distance | 1,000mm ( 2,500 / 6,000mm opt. ) Unlimited recycle feed distance | 1,000mm ( 2,500 / 6,000mm opt. ) Unlimited recycle feed distance |
Saw Spindle Speed | 1,500 - 3,500R.P.M . | 1,000 ~ 3,000R.P.M . | 900 ~ 1,500R.P.M. |
Saw Spindle Motor | 15 HP (4P) | 15 HP(4P) | 20 HP(4P) |
Inverter | 15 HP | 15 HP(opt.20HP) | 20 HP |
Hydraulic Feed Motor | 2 HP | 2 HP | 2 HP |
Feeding | 1.5kw | 2kw | 2kw |
Table Height From Floor | 920 mm | 1,010 mm | 1,110 mm |
Touch-Sensing Screen | 7" | 7" | 7" |
Saw Blade Size | Choice of 12"~24"(1" bore) | 24” ~ 30” (50mm bore) | 30” ~ 36” (50mm bore) |
Air Pressure | 4 ~ 6 kgs / cm2 | 4 ~ 6 kgs / cm2 | 4 ~ 6 kgs / cm2 |
Max. Load | 100kgs | 200kgs | 250kgs |
Machine Dimensions (L x M x H) | 3,700 x 1,970 x 1,870 mm | 3,900 x 2,290 x 1,940 mm | 4,200 x 2,290 x 2,030 mm |
Packing Dimensions (L x M x H) | 3,800 x 2,070 x 1,970 mm | 4,000 x 2,390 x 2,040 mm | 4,300 x 2,390 x 2,130 mm |
Net / Gross Weight | 2,835 / 2,920 kgs | 2,800 / 3,100 kgs | 3,300 / 3,600 kgs |
*We reserve the rights to modify above specification without notice.
- CE Standard
- Infeed,Outfeed Roller Table
- Chip Collector
- Hydraulic Clamping
- Saw Blade
- Aluminum
- Brass
- heat sink
- PVC
- plastic steel
- Bakelite
- acrylic plastic
- Teflon
- honeycomb board
- wood
- other non-ferrous metals.